The Ranco ETC is microprocessor-based family of temperature controls designed to provide on/off control for commercial heating, cooling, air conditioning and refrigeration applications.  With its wide temperature range, one and two stage capability, selectable heating/cooling modes and multi-voltage input, the ETC is one of the most versatile temperatures controls available.

Digital Display
Unlike many electronic controls, the ETC is simple to install and set up. One finger is all you need to program it.  The standard digital display and keypad allow the user to adjust the temperature settings with 1° resolution. Set point temperature, differential and mode of operation (heating or cooling) can all be selected using the keypad and display.  When not in the programming mode, the display gives a constant readout of the sensor temperature. Enunciators on the liquid crystal display also indicate when the relay is energized.

Remote Temperature Sensing
The ETC is capable of remote temperature sensing up to 400 feet away from the control when using standard 22 gauge sensor wire.

Built-in Safety
Every ETC model is equipped with diagnostic programs that check for hardware, software or system problems and display different error codes to indicate where the trouble is.

The ETC also has a keypad lockout switch to prevent tampering with the control settings by unauthorized personnel.  The switch, which is located inside the enclosure, can be used to disable the keypad function.

Optional Analog Output
ETC models are available with a 0 to 10 volt analog output that can be used for remote temperature indication or as input to a central monitoring system.  This signal is a linear representation of the sensor temperature with 0 volt = -30° F and 10 volts = 220° F.